TRIGGER SYSTEMS RUBY SUMP 20 (20" X 20") RUBY20C

Trigger SystemsSKU: RUBY20C
filler

Price:
$419.99

Description

The RUBY20C sump is loaded with features and comes with the trademark dark RUBY translucent red material. This sump can be used as a berlin style sump or a refugium style sump.  Some features of the RUBY20c sump are:

  • 3 position probe holder

  • Adjustable water level

  • RUBY red wall to block light and prevent unwanted algae growth in skimmer section

  • Locking filter sock holder

  • Foam filter block

  • Protein skimmer section

  • Refugium section

RUBY20C SECTION DETAILS|

The RUBY20C has 3 main sections. Section 1 of the CUBE design is where the water from the main tank enters through the filter sock. This is the section where the protein skimmer typically sits. Water flows from this section through a slit in the baffle into Section 2.

Section 2 is typically used as the refugium section. Having the refugium facing the front is a nice feature allowing easy maintenance and visibility of the refugium. Water flows to the right and then towards the back over the baffle through the overflow teeth. The wall with the overflow teeth moves up and down to set the water level for Section 1 and Section 2. The water then goes through a foam block and under a baffle into Section 3.

Section 3 is the return section where the return pump will sit, pumping water back to the display tank.

KEY FEATURES


1. Locking filter sock holder

2. Drawstring tab for 7″ drawstring filter sock

3. Full top support brace to prevent bowing

4. Adjustable water level

5. Filter foam block

6. Three position probe holder

ADJUSTABLE WATER LEVEL

Water level in the sump is adjustable from 7″ to 9.5″ to accommodate water height requirements for different protein skimmers. Simply move the baffle to the desired height location and tighten the two bolts to hold in place.

THREE SLOT PROBE HOLDER

The RUBY20C sumps come with a probe holder that can hold up to three probes. The two outside holes are 0.63” in diameter and the center hole is 0.8” in diameter to fit different sized probes.

DRAWSTRING TABS

A tab is located on the top support brace in front of the 1” bulkhead fitting. The purpose of this tabs is to provide a location for tying off 7” diameter filter socks that have drawstrings. The 7″ socks allow for longer times before the filter sock gets clogged and needs to be cleaned or replaced.

LOCKING FILTER SOCK HOLDER

Filter socks snap and lock into the filter sock holders to secure the sock from falling out when it becomes clogged. The 4” filter sock is 100 micron rating.

RUBY20C

  • Dimensions: 20″ long x 20″ wide x 15″ high
  • Drain/Skimmer Section: 11.625″ x 12″
  • Front/Refugium Section: 19.5″ x 7.25″
  • Return Pump Section: 12″ x 7.625″
  • Total Water Volume: 24.3 gallons
  • Skimmer Water Level: 7″ to 9.5″ adjustable

ADD A MATCHING ATO TANK

Payment & Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed