The FilmTec 100 GPD membrane TW30-1812-100HR fits most all RO systems. It is a TFC thin film composite membrane with a 98% HIGH rejection rate.This 100 GPD membrane is intended to be used with a 1000 fast flush flow restrictor.
FilmTec Membrane 100 GPD The FilmTec 100 GPD membrane TW30-1812-100HR fits most all RO systems. It is a TFC thin film composite membrane with a 98% rejection rate. This membrane is high output with slightly lower rejection. This 100 GPD membrane is intended to be used with a 1000 fast flush flow restrictor.
Dimensions and Weight
Width: 1.74" X Length: 11.75"
Weight : 1 Pound
Illustrations/Diagrams/Instructions Dow Filmtec HR 100 GPD data sheet
How to Change Filters
SPECIFICATIONS FOR TW30-1812-100HR
|FilmTec Part Number:
|Size (Approximate):||1.8" Dia. x 12"L*|
|Flow Rate:||100 gpd (16 lph)|
|Applied Pressure:||50 psig (3.4 bar)|
|Minimum Salt Rejection:||96%|
|Stabilized Salt Rejection:||98%|
Permeate flow and salt rejection based: 250ppm softened tap water, 77°F, 15% recovery, 50 psig.
OPERATING LIMITS FOR TW30-1812-100HR
|Maximum Operating Temperature:||113°F (45°C)|
|Maximum Operating Pressure:||300 psig (10 bar)|
|Maximum Feed Flow Rate:||2.0 gpm (7.6 lpm)|
|pH Range, Continuous Operation*:||2-11|
|Maximum Feed Silt Density Index:||5|
|Fere Clorine Tolerance**:||<0.1ppm|
*Maximum temperature for continuous operation above pH 10 is 95°F
**Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.